|
The DL3100 T3 Access Multiplexer allows you to connect up to two high-speed
data terminal equipment (DTE) devices to a public or private T3 network. The
compact, full-featured DL3100 can be rack-mounted or surface-mounted, and
is ideally suited for both hub and remote site network installations. The
DL3100 is a versatile, digital service multiplexer that connects high-speed
bridges, routers, front-end processors and other data terminal equipment to
a T3 network. The DL3100 provides up to two HSSI data interfaces to the DTE.
User-programmable bandwidth allocation allows you to configure the DL3100
for data rates from 300 kbps to 44.2 Mbps.
Main Features:
- T3 network interface
- Data rates up to 44.2 Mbps in 300 kbps increments
- Up to two DTE ports: HSSI data interfaces
- Local or remote management via the front panel, terminal, an
embedded SNMP agent
- Extensive diagnostic features: front-panel LEDs, line monitor
jacks, built-in test loops, and integral event log with non-volatile
memory
- Downloadable code
|
